Hydrolysis of cellobiose by immobilized β-glucosidase entrapped in maintenance-free gel spheres

A crude preparation of Aspergillus niger β-glucosidase (27.5 cello-biase U/mg protein at 40°C, pH 5.0) was immobilized on concanavalin A-Sepharose (CAS). The cellobiase activity of the immobilized enzyme was 1334 U/mg dried CAS or 108 U/mL CAS gel. The β-glucosidase-CAS complex was entrapped within crosslinked propylene glycol alginate/bone-geletin gel spheres that possessed between 0.67 and 2.35 cellobiase U/mL spheres, depending on their size. The effect of cellobiose concentration (10–300 mM) on the activity of native, immobilized, and gel-entrapped enzyme was determined. It was shown that concentrations of cellobiose between 10 and 180 mM were not inhibitory to the entrapped enzyme, although inhibition was found to occur with the native and immobilized enzyme. Exogenous ion addition was not necessary to maintain the structural integrity of the spheres, which were stable for 4 d at 40°C.     

Synthesis of linear and starlike polymers from poly(propylene glycol) methacrylate using controlled radical polymerization

The copper‐catalyzed atom transfer radical polymerization (ATRP) of poly(propylene glycol) methacrylate (PPGM) in solution to produce linear and starlike polymers is reported, using methylethyl ketone as the solvent and a temperature of 80 °C. The ATRP system used was efficient for polymerization of the functionalized monomer without protecting hydroxyl end groups of monomer. The polymerizations were consistent with “living” or controlled processes, as revealed by the linear evolution of molecular weight with conversion. Increasing the [M]₀:[I]₀ ratio resulted in increasing molecular weights, whereas the polydispersity indices remained low (M_w/M_n < 1.4) even at high conversion. Decreasing the [CuBr]₀:[I]₀ ratio resulted in lower conversions, slightly larger polydispersities, and decreased molecular weights, likely resulting from a lower initiation efficiency. Polymers were characterized by ¹H and ¹³C NMR; molecular weights of polymers with low degrees of polymerization were estimated by end‐group analysis from ¹³C NMR spectra obtained using distortionless enhancement by polarization transfer and the gated decoupling techniques. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 334–343, 2002     

乙酰丙酮钇催化环氧氯丙烷的均聚合与共聚合

用过渡金属络合催化剂聚合环氧氯丙烷能获高分子量的聚合物。稀土络合催化剂对环氧乙烷,环氧丙烷及环硫丙烷的开环聚合具有明显效果。本文选用Y(acac)_3-H_2O-Al(i-Bu)_3催化剂,考察环氧氯丙烷的均聚合及其与环氧乙烷,环氧丙烷的共聚合,并用核     

Preparation and characterization of polypropylene/mesoporous silica nanocomposites with confined polypropylene

Polypropylene (PP)/Ti-MCM-41 nanocomposites were prepared by isospecific propylene polymerization with Ti-MCM-41/Al(i-C₄H₉)₃ catalyst. The cross polarization/magic angle spinning (CP/MAS) ¹³C NMR spectrum of the composite was similar to that of the conventional isotactic PP, and the decrease in the pore volume of Ti-MCM-41 in the nanocomposites, as measured by N₂ adsorption, was consistent with the value calculated from the weight loss in the thermogravimetric analysis (TGA) curve; both these facts attest to propylene polymerization within the mesopores of Ti-MCM-41. Alkali treatment followed by extraction with o-dichlorobenzene allows us to extract the confined PP out of the Ti-MCM-41 mesopores. Although the PP/Ti-MCM-41 nanocomposites do not exhibit a crystalline melting point, the same PP when extracted from the mesopores showed a clear melting point at 154.7 °C; this indicates that the crystallization of PP confined in mesopores is strongly hindered. For the PP polymerized within the confinement, the molecular weight (M_w) and molecular weight distribution (M_w/M_n) were 84,000 and 4.3, respectively; these values were considerably smaller than those of the PP polymerized concurrently outside the Ti-MCM-41 mesopores (M_w = 200,000–450,000, M_w/M_n = 40–75). Therefore, the confinement also has a marked effect on the molecular weight of the PP. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 3324–3332, 2003     

Polymer blends based on the β-modification of polypropylene

iPP/sPP, iPP/rPP, iPP/PVDF and iPP/PA-6 blends, and their β-nucleated forms were prepared in the present study. The components of iPP/sPP and iPP/rPP blends are compatible in the molten state. The phase structure of the melt of iPP/PVDF and iPP/PA-6 blends is heterogeneous. The melting and crystallisation characteristics as well as the structure and polymorphic composition of these blends were studied by polarised light microscopy (PLM) and differential scanning calorimetry (DSC). When semicrystalline polymers are added to iPP, the most important factor of the formation a blend with β-crystalline phase is the α-nucleation effect of the second polymer. In the case of polymers with an α-nucleating effect, the temperature range of their crystallisation should be lower than that of β-iPP. β-nucleated iPP/PVDF and iPP/PA-6 blends are extreme examples showing that completely β-iPP matrix can not form even in the presence of a highly effective β-nucleant, because of the strong α-nucleating ability and higher crystallisation temperature range of PVDF and PA-6. We found that the β-crystallisation tendency of random propylene copolymers can be enhanced by adding an iPP homopolymer.     

Synthesis of substituted benzoxazinylthieno[2,3-<Emphasis Type="Italic">b</Emphasis>]pyridines by the reaction of (3-cyanopyridin-2-ylthio)acetic acids or their amides with <Emphasis Type="Italic">o</Emphasis>-aminophenyl(diphenyl)carbinol

A general method for the synthesis of 3-amino-2-(4,4-diphenyl-4H-3,1-benzoxazin-2-yl)thieno[2,3-b]pyridines was proposed. The method involves reactions of (3-cyanopyridin-2-ylthio)acetic acids or their amides with o-aminophenyl(diphenyl)carbinol in nitromethane in the presence of perchloric acid followed by neutralization of the resulting salts.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2759–2762, December, 2004.     

Electrochemical determination of iodide on a vanadium oxide-polypropylene carbonate coated glassy carbon electrode

A vanadium oxide-modified glassy carbon electrode was simply and conveniently fabricated by casting vanadium tri(isoproxide) oxide (VO(OC₃H₇)₃) and poly(propylene carbonate) (PPC) onto the glassy carbon electrode surface. The electrochemical properties of iodide at the VO(OC₃H₇)₃-PPC film-modified glassy carbon electrode were investigated by cyclic voltammetry, and an anodic peak was observed at approximately +0.71 V (vs. SCE). Based on this, a sensitive and convenient electrochemical method was proposed for the determination of iodide. Flow injection amperometry (FIA) exhibited a good linear relationship with the concentration of iodide in the range of 5 × 10⁻⁷ mol L⁻¹ and 1 × 10⁻³ mol L⁻¹, and the detection limit was 1 × 10⁻⁷ mol L⁻¹. Quantitative recovery of iodide in synthetic samples has been obtained and the interferences from different cations and anions have been studied. The method has been successfully applied to the determination of iodide in dry edible seaweed. The concentrations of iodide measured by this method are in good agreement with those obtained by spectrophotometric method.     

Preparation and characterization of dendrimer-star PNIPAAM using dithiobenzoate-terminated PPI dendrimer via RAFT polymerization

Two dendritic reversible addition-fragmentation transfer (RAFT) agents with 8 and 16 terminal dithiobenzoate (DTB) groups on the surface of poly(propylene imine) (PPI) dendrimers (generation 2.0 and 3.0, respectively) were successively prepared, and they were used in the RAFT polymerization of N-isopropylacrylamide (NIPAAM). The polymerization kinetics was confirmed to pseudo-first-order behavior. The ¹H NMR and GPC analyses show that the dendrimer-star den (NIPAAM)_x (x = 8 or 16) prepared by RAFT method has well-defined structure, controlled molecular weight and low polydispersities (PDI < 1.3). The aqueous solution prepared from dendrimer-star PNIPAAM showed reversible changes in optical properties: transparent below a lower critical solution temperature (LCST) and opaque above the LCST.     

Influence of multiwall carbon nanotubes on morphological and structural changes during UV irradiation of syndiotactic polypropylene films

The effect of UV irradiation on the morphology and structure of syndiotactic polypropylene (sPP) is investigated both for pure films and those filled with multiwall carbon nanotubes (MWCNTs). UV treatment causes a structural reorganization of pure sPP films. It seems that the incorporation of MWCNTs has a strong stabilizing effect, with nanotubes acting as a limiter of the UV‐induced chain breakage, especially when a good dispersion of carbon nanotubes in the polymer is achieved. The incorporation of MWCNTs introduces a high concentration of defects in the crystal structure of sPP, which limits the UV‐induced growth of crystallites, and prevents the development and propagation of cracks caused by UV irradiation. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012